LED lights and used in letters and Numbers display can more than 30 service life. Along with the development of modern technology, may be used more widely LED lighting facilities on the field. Leds are commonly used in need of special lighting facilities. Most traffic signals and, for instance, now use red, green or blue light LED. They have also been used to need high brightness illumination characteristics of the building.

Leds could applied in general lighting purposes?

Yes. Although because they cannot satisfy each tile lumen output requirements, and the early LED technology limited colors, thus LED to restrictions in general lighting technology on the initial application effect is not good, to modern LED lighting facilities can be applied to daily.

Leds is how to distinguish between traditional source, such as incandescent lamp, fluorescent lamp and hid xenon lamp?

Different from other sources, and will not be visible power LED directly convert light and heat generation or other forms of radiation, such as uv. Traditional light ray radiation Angle even more than 360 ˚. LED light radiation is a fixed arc. Use LED in some facilities and light design should be fixed, it is an advantage for now many sources and challenge.

The advantage and application of LED lighting technology in ordinary LED the challenge is what?

Leds have efficient and durable. These advantages, we do the energy saving, make our cost control and prolong the service life of the lamp. Because the light radiation is LED a fixed arc lighting devices, without being absorbed and loss of light or the light radiation Angle on all sides of light pollution caused thereby. On the other hand, when LED lighting industry, when applied to its fixed arc Angle of radiation challenges. The lamps and lanterns of elaborate design used as the light source can ensure in LED light irradiation range is average distribution.

Use the lamps and lanterns of LED lights for the light source for environmental protection have what advantage?

The LED lighting lighting without mercury or harmful gas, can achieve maximum life and will be reduced to minimize waste. In addition, they are completely the materials can be recycled, so they pollution to the environment is the smallest. When they are applied to the design of special facilities such as the LED lamp light pollution can eliminate, will become the lamp and reduce the outdoors to people of adverse effects.

Why u-micro production power does not exceed the lamp 110W?

Production of high-power lamps LED the technical problem. However, the leader is very wise u-micro that LED technology is to put the energy consumption. For many facilities, with a light 110W LED lamp can replace a tradition of effective high-power lamps. Along with the development of technology of LED, each W greater amount of ideas will lumens become possible. U-micro will use this advantage to produce more energy efficient environmental lamps and lanterns.

Why u-micro LED lighting not use lens?
Other LED lamp manufacturers are using lens, direct light through the lens output will be LED. However use lenses will bring about a series of problems: lens of a lens cost is high, the output will be a 20% of the radial brightness leds absorption and easy dirty, lens mirror time long also affect light intensity. U-micro companies using their own development and patented "reflection" technical specification for conducting cups per bunch of LED lighting. Reflective glass manufacturing costs to cheap, it is lens does not absorb the light, make every ray gets effective distribution, more effective than use lens.

Environmental temperature affects how? LED,

Leds device design must consider the thermal control temperature, regard it as a key component, and must use good quality LED light source. Unlike fluorescent lamp, cryogenic environment does not affect the effect of LED lights.

What is the temperature?

When the temperature is LED work, every second and base the contacts produced temperature. Make temperature in the lowest temperature maintain growth can make LED light attenuation. Temperature is to evaluate the quality of product, the key LED temperature can prolong the service life of low LED.

How to control temperature?

U-micro LED lamp use aluminum radiator for lamp shell, this kind of unique design as far as possible will be reduced to the minimum temperature temperature.

Leds could last?

One LED light source with traditional source of not using life. Instead, leds with the use of time is very small, light attenuation. Normally, LED light-source longevity is 50,000 hours or longer. If one does not affect the damaged LED lights to light.

Why LED by light attenuation measure of life?

LED lamp life than incandescent lamp and fluorescent or hid xenon lamp much longer. Leds general service life is 50,000 hours to 100,000 hours. With the use of the passage of time, long time of leds luminous flux become smaller and not completely ruined. This luminaire decrescent called "light", a decline of LED lights used time (time) light attenuation calculation.
Industrial standards on evaluation of leds service life is the source of the light, LED up to 30% when failure as a evaluation. 10 million hours is not a lamp life. LED light-source longevity is rated as light attenuation 30% when scrap. More than 10 hours of LED lights will work, but the flux can reduce.

Five thousand hours of many years of life?

One LED lamp life depends on how many hours a day job

Five thousand hours every time is 10 million hours equals
24 hours every 5.7 years 11.4 years
18 hours every day in recent years 7.4
12 hours every day in year 11.4 22.8
Eight hours every day in 34.2. Weaker

Fluorescent light bulbs with
Average household can be abandoned by fluorescent light bulb?
Fluorescent light bulb contains a small amount of mercury inside, this is a kind of harmful substances. Many of the local government agency for the average family fluorescent light bulb has abandoned. We suggest you in your national or local government agency, check them for abandoned fluorescent light bulb is a kind of policy.

Fluorescent light bulb can throw incinerators burned?
Don't burn fluorescent light bulb or will they throw into landfill. Fluorescent light bulb will burn after toxic mercury vapor released into the atmosphere.

The manufacturer to fluorescent agreement would be abandoned fluorescent bulbs recovery?
Maybe. Check to see if the manufacturer's website for recycling used fluorescent light bulb made the agreement. This factory may charge.

I want to change my fluorescent light bulbs, operating these safe?
If not broken glass bulb is not harmful to human body.

If I throw with broken pieces of light bulb or what measures should be taken?
If your national or local environment agency allowed households disposal fluorescent bulbs so fluorescent light bulb seals shall be in two layers of plastic bags. Don't waste plastic bags will be loaded with light bulb.

If a fluorescent light bulb broken, I what measures to take?
The United States environmental protection agency (EPA) put forward the following Suggestions.

In before sweeping: will indoor air discharge
* let pets to leave the room, when walking, don't let anyone through the broken glass.

Open the window to let * aired the room 15 minutes more

* if you open air conditioning, please turn off the air conditioning system.
The cleaning steps. Hard
The paper use texture * hard carefully pick or cardboard pieces of glass and powder and will these fragments into a glass with metal cover the tin (e.g., or in a sealed bag.
Use adhesive tape, such as *, on the ground of small glass chi and finely powder stuck up.
Hot towel with clean * or one-time wet towel to wipe down the place is light. Be in glass or plastic put towels.
* don't use cleaner or broom clean break scattered light bulb
Carpet cleaning steps
* carefully picked up large pieces of glass, will they put in the vitreous cover with metal tin (e.g., or in a sealed bag
Use adhesive tape, such as *, on the ground of small glass chi and finely powder stuck up.
If you need to use the vacuum cleaner just * in the naked eye can see into the broken glass after clearing slag, use cleaner broke the bulb. Clean
* remove vacuum bag (or empty cans), and wiped the bag or debris into the sealing plastic bag.

Clothing, bedding and other soft fabrics cleaning steps

* if clothes or bedding directly met the broken glass or bulbs mercury powder, these can infiltration fabric, garments and bedding should get rid of. Don't wash this kind of clothing because mercury will be trapped in the washing machine or sewer.
However, you can * * * * washing clothes or other material, has been exposed to mercury vapor from the broken fluorescent lamp, if you are wearing clothes, clean clothes, only breaking fluorescent lamp are not directly contact materials from the failure of the bulb.

* if shoe into the broken glass or bulbs mercury powder, with a clean wet towel hot towel or one-time will wipe clean place of pollution. Be in glass or plastic put towels.

Clean cleaning tools
* will immediately all cleaning tools in the trash inside or outside the place in order to protect the next cleaning.
After the completion of the clearing * to wash your hands
Check your * or government about junk. Some states do not allow the such waste treatment. Instead, they will not break and bring to light bulb of recycling center.
* clean carpet steps: in ventilated room and aspiration.
Next vacuumed *, use cleaner air conditioning system before closing and opening the window.

Use cleaner, * ventilated 15 minutes above, keep air conditioning relations.

Contact for health effects of mercury what?

Mercury is a kind of effective nerve toxin, especially to children and the unborn baby.

Mercury vapor through the lungs into the body absorb, mercury elements (metal) on health. Once the mercury element overflow or product external vitreous rupture, mercury will be exposed to the air, these will be harmful to human body health, especially the warm air circulation or poor interior space. People should consult a doctor and their harm by mercury.